Amagqabantshintshi nge-R25 yee-Drills zokuSebenzisa i-Growut ye-anchor ye-anchor rod
Iirods ze-Anchor zihlala zilungele inkxaso eyomeleza imigodi yemigodi, ii-tunge tunels, ukhuseleko lwethambeka, kunye nezinye iindawo. Ngokubanzi, imingxunya ye-Anchor ye-Anchor ikhutshiwe kusetyenziswa i-anchor rod, kunye neearhente ezilungele i-agers efanelekileyo (i-resin powder) zibekwe. Ke, izixhobo ezifana ne-anchor rod isetyenziselwa ukuqhuba i-anchor rod kumngxunya we-anchor rod, kwaye isebenzise izixhobo ezifana ne-anchor rod yokufaka amantongomane kuyo; I-Anchor yasekunene ye-anchor, ekwabizwa ngokuba ngamandla alinganayo inyibiliki yentsimbi yentsimbi, yenziwa ngentsimbi echanekileyo yentsimbi, kunye nobude obugcweleyo obunokutsalwa ngamantongomane. Isetyenziswe ngokudibeneyo ngeplate ye-anchor kwinkxaso ye-teun yenkxaso. I-bolt yimveliso yokutshintshwa kwe-antin of right ye-rists ye-BOLT, ngentsebenzo ebalaseleyo.
Ukucaciswa kwe-R25 ye-R25 ye-proble ye-proches ye-anchor ye-anchor rod
| I-R25n | I-R32L | I-R32n | R32 / 18.5 | I-R32s | I-R32S | I-R38n | R38 / 19 | I-R51L | I-R51n | T76n | I-T76s | |
| I-Deameter engaphandle (mm) | 25 | 32 | 32 | 32 | 32 | 32 | 38 | 38 | 51 | 51 | 76 | 76 |
| Ububanzi bangaphakathi(mm) | 14 | 22 | 21 | 18.5 | 17 | 15.5 | 21 | 19 | 36 | 33 | 52 | 45 |
| Ububanzi bangaphandle, i-MM) | 22.5 | 29.1 | 29.1 | 29.1 | 29.1 | 29.1 | 35.7 | 35.7 | 47.8 | 47.8 | 71 | 71 |
| Umthamo wokugqibela (Nni) | 200 | 260 | 280 | 280 | I-360 | 405 | I-500 | I-500 | I-550 | I-800 | I-1600 | Ngo-1900 |
| Isivuno somthwalo (KY) | I-150 | 200 | 230 | 230 | 280 | I-350 | I-400 | I-400 | I-450 | I-630 | 1200 | I-1500 |
| Amandla amanqindi, i-RM (n / mm2) | I-800 | I-800 | I-800 | I-800 | I-800 | I-800 | I-800 | I-800 | I-800 | I-800 | I-800 | I-800 |
| Isivuno, i-RP0, 2 (N / MM2) | I-650 | I-650 | I-650 | I-650 | I-650 | I-650 | I-650 | I-650 | I-650 | I-650 | I-650 | I-650 |
| Ubunzima (kg / m) | 2.3 | 2.8 | 2.9 | 3.4 | 3.4 | 3.6 | 4.8 | 5.5 | 6.0 | 7.6 | 16.5 | 19.0 |
Iimpawu zokuntywila ngokwakho
1. Ikhuselekile, inokuthenjwa, nokusindisa ixesha.
2. Ufakelo olulula kunye nokuSebenza okulula.
3. Ukukhetha ii-bits ze-Drill kwiimeko ezahlukeneyo zomhlaba.
I-4. Imisebenzi yokuGqibela ivumelanisa ngokuvumelana okanye emva kokuqhuba. I-Grout inokugcwalisa ifratshi ngokufanelekileyo.
I-5. Imivalo ye-anchor inokunqunyulwa kwaye yandiswe ngesicelo, sifaka isicelo sendawo emxinwa.
I-6. Inika uxinzelelo oluphezulu lwe-bound ngaphandle kombhobho wentsimbi egudileyo kuxhomekeka kumtya oqhubekayo.
Izinto eziluncedo zokuzilolonga ngokuzithandela kwi-anchor rod
I-1. Ukuntywila kokugqobhoza i-anchor ukukhulisa i-anchor i-puid yentsimbi yentsimbi, intambo yokwakha intambo, kunye nokuphumeza i-Exprenting, ukukhulisa i-Greyiting, ukufezekisa imisebenzi ye-ancheling ye-ancling ye-ancling rod.
2. Kukho i-drill bit enomkhosi oqinileyo wokungena phambi kwe-gon-gon-god holt god, enokufumana iindlela ezahlukeneyo zamatye aphantsi koomatshini abasebenza ngamatye.
3. Inomgangatho oqhubekayo oqhubekayo kwaye inokusetyenziswa njenge-Drill rod ukugqiba ukuqhuba kwimingxunya ye-anchor kunye ne-drill bit.
4. Iqumrhu le-anchor le-anchor yombhobho we-drill akufuneki ukuba ikhutshwe, kwaye indawo engenanto inokusebenza njengejelo elikhulayo lokukhulisa ngaphakathi ngaphakathi.
5. Umkhweli ophumeleleyo unokugcina uxinzelelo oluqinileyo, agcwalise ngokupheleleyo izithuba, alungise izithuba ezaphukileyo zamatye, kwaye iipads ezinamatye aphezulu kunye namandongomane anokudlulisela ngokulinganayo kwilitye elijikelezileyo kunye ne-anchor rod.
6. Ngenxa yesithathu kumsebenzi omnye wolu hlobo lwentonga ye-anchor, inokuqinisekisa ukuba i-adhor kunye nefuthe leziphumo zokukhusela udonga kunye nokukhusela ukhuseleko eluntwini.
