Iipleyiti zeNickel Alloy

Inkcazo emfutshane:

Igama: Iipleyiti zeNickel Alloy

Ubukhulu bepleyiti: 5% iintsimbi ze-nickel: 5–70 mm (A 645 Gr A 5-50 mm) 5.5% iintsimbi ze-nickel: 5-50mm 9% iintsimbi ze-nickel: 5-60 mm.

Ububanzi bepleyiti: 1600–3800 mm, iipleyiti ezibanzi kakhulu: Iintsimbi ze-nickel eziyi-9% ngobukhulu obuyi-5 mm ziyafumaneka ngobubanzi obufikelela kwi-2800 mm.

Ubude bepleyiti: 12,700 mm ubuninzi.

Umgangatho: ASTM / ASME B 161/162/163, ASTM / ASME B 725/730

Udidi: I-Alloy C276, i-Alloy 22, i-Alloy 200/201, i-Alloy 400, i-Alloy 600, i-Alloy 617, i-Alloy 625, i-Alloy 800 H/HT, i-Alloy B2, i-Alloy B3, i-Alloy 255

Ubunzima obucwangcisiweyo: Ubuncinane iitoni ezi-2 okanye i-1 pcs

Thumela i-imeyile kuthi I-WhatsApp Amy@jindalaisteel.com

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isishwankathelo seePlate zeNickel zeCryogenic

Iipleyiti ze-nickel ezi-cryogenic zilungele kakhulu ukusetyenziswa kwiqondo lobushushu eliphantsi kakhulu. Zisetyenziselwa ukuthutha igesi yendalo enyibilikisiweyo (LNG) kunye negesi ye-petroleum enyibilikisiweyo (LPG).
I-A 645 Gr A / A 645 Gr B, ukunciphisa iindleko kunye nokhuseleko olongezelelekileyo ekwakhiweni kweetanki ze-ethylene kunye ne-LNG.
Izixhobo zemveliso zanamhlanje zisenza sikwazi ukuvelisa zombini iiklasi zentsimbi A 645 Gr A kunye neGr B kunye neentsimbi ze-nickel zesiqhelo ze-5% kunye ne-9%.

● I-LNG
Igesi yendalo inyibilikiswa kubushushu obuphantsi kakhulu obuyi--164 °C, nto leyo enciphisa umthamo wayo ngama-600. Oku kwenza ukuba igcinwe kwaye ithuthwe ibe nokwenzeka kwaye isebenziseke kakuhle ngokwezoqoqosho. Kula maqondo obushushu aphantsi kakhulu, ukusetyenziswa kweentsimbi ezikhethekileyo ze-nickel eziyi-9% kuyimfuneko ukuqinisekisa ukuqina okwaneleyo kunye nokumelana nokuqhekeka okuqhekekayo. Sinikezela ngeepleyiti ezibanzi kakhulu kule nxalenye yemarike, nokuba zinobukhulu obufikelela kwi-5 mm.

● I-LPG
Inkqubo ye-LPG isetyenziselwa ukuvelisa i-propane kunye neegesi ezisebenza ngegesi yendalo. Ezi gesi ziyanyibilika kubushushu begumbi xa ziphantsi koxinzelelo kwaye zigcinwa kwiitanki ezikhethekileyo ezenziwe ngeentsimbi ze-nickel eziyi-5%. Sinikezela ngeepleyiti zeqokobhe, iintloko kunye neekhowuni ezivela kumthombo omnye.

Umzekelo, thabatha ipleyiti ye-ASTM A 645 Gr B

● Ukusetyenziswa kwe-A 645 Gr A ekuveliseni iitanki ze-ethylene kunika amandla aphezulu amalunga ne-15%, ukhuseleko olwandisiweyo kunye nokwenzeka kokunciphisa ubukhulu bodonga ukuze kongiwe iindleko ezinkulu ekwakhiweni kweetanki.
● I-ASTM A 645 Gr B ifumana iipropati zezinto ezilingana nezo zentsimbi ze-nickel zemveli eziyi-9% kwindawo yokugcina i-LNG kodwa iyahlangabezana nezi mfuno ngomxholo we-nickel ophantsi omalunga nama-30%. Esinye isiphumo kukunciphisa kakhulu iindleko ekuvelisweni kweetanki ze-LNG ezikunxwemeni naselunxwemeni kunye nokwakhiwa kweetanki zepetroli ze-LNG.

Umgangatho ophezulu wokhuseleko oluphezulu

Isiseko seepleyiti zethu ze-nickel ezikumgangatho ophezulu zii-slabs ezicocekileyo kakhulu ezivela kwisityalo sethu sokwenza intsimbi. Umxholo wekhabhoni ophantsi kakhulu uqinisekisa ukudityaniswa okugqibeleleyo. Ezinye iingenelo zifumaneka kumandla abalaseleyo empembelelo yemveliso kunye neempawu zokuqhekeka (i-CTOD). Umphezulu wepleyiti yonke uvavanywa nge-ultrasonic. I-magnetism eseleyo ingaphantsi kwe-50 Gauss.

Ukulungiswa kwangaphambili ukuhlangabezana neemfuno ezithile zabathengi

● Itshiswe ngesanti okanye itshiswe ngesanti kwaye iprimerwe.
● Ukulungiswa kwemiphetho edibeneyo: Ukuqina okuncinci komphetho otshisiweyo kwenzeka ngenxa yomthamo wekhabhoni ephantsi.
● Ukugoba ipleyiti.

IiNqanaba zeNsimbi zeePlati zeNickel zeCryogenic ezibonelelwa yiJindalai Can

Iqela lentsimbi	Umgangatho wezinga lentsimbi	Amanqanaba entsimbi
Iintsimbi ze-nickel eziyi-5%	EN 10028-4 / ASTM/ASME 645	Ibanga A le-X12Ni5 A/SA 645
Iintsimbi ze-nickel eziyi-5.5%	I-ASTM/ASME 645	Ibanga B le-A/SA 645
Iintsimbi ze-nickel eziyi-9%	EN 10028-4 / ASTM/ASME 553	Uhlobo 1 lwe-X7Ni9 A/SA 553